Double Glazing Locks Repair
When a double-glazed window won't close it creates draughts and allows valuable heat to escape. This can also compromise the security of your home and puts you at a higher risk of burglary.
Over time, double glazed window hinges as well as seals, handles and handles may be damaged. If this is the case, it could affect how your windows function and invalidate any warranty you may have.
Locks that aren't working
Many people put anti-burglar systems on their main gates and doors however, they forget that windows are also prime targets for burglars. Having faulty locks can cause drafts inside the home, allowing valuable heat to escape and weaken the security of your home.
If you notice that your uPVC window locks aren't working, there is a good chance that the mechanism for locking has become blocked. This is typically due to a split in the gearbox component. This could cause the handle to turn 360 degrees, but not fully open. This is a problem that is common with uPVC windows, however it is also a problem in tilt-and-turn windows as well as sliding sash windows.
If this happens, release the lock by pressing the lever handle. This can allow you to free the gear box and allow the opening of the window. If this does not work, you may have to replace the window lock mechanism entirely.
Most modern uPVC windows use espagnolette locks. These are a locking system inside the window that secures the window employing locking cams shaped like mushrooms that are inserted into the frame. The handle controls the gearbox that then triggers the cams to either move upwards or downwards. The spindle of the lock can break which causes the handle to move but the door to close or open.
A faulty gearbox can also cause your window to appear locked but not actually be. double glazing window repairs could happen when the rods in the centre, also referred to as crocodile tooth fixings within the gearbox break off. If this is the case, Misty Glaze can supply and fit replacements for these rods to restore the operation of your window.
It is important not to force the lock to break or get stuck one. This could cause the lock to break or snap - particularly with a window made of uPVC because it expands and expands as it warms and cools. It is best to contact an expert locksmith who will diagnose the problem and repair it.
Sticky Doors/Window
It's a nuisance to find doors and windows that stick and sag, but they can be a sign of more serious structural problems. It's important to get professional help if you have trouble opening or closing a door or window. This could be the result of many things such as foundation settlement and inadequate support for crawl spaces.
Windows and doors often are stuck due to humidity or an issue with the frame itself. If your frames are made of wood for instance, they may be prone to warping when exposed to humidity. Even if the hardware looks nice, it can make it difficult to open and close your frames. In this case the wood expands and presses against the hinges, causing friction.
If your window or door is sagging in summer and you are unable to get it to close, try using bar soap to decrease the friction. This will make it smaller and could temporarily resolve the problem. This solution may need to be repeated frequently during periods of high moisture.
A more permanent fix involves making the door or window frame to create an even finish. This can be done by hand or using a power tool. A professional can also sand and paint or stain your frame or door to make it look new again.
If soaping or sanding doesn't help, your problem may be due to foundation settlement or a weak crawlspace. Look for cracks in the area. If you spot these indications, you need to call in a foundation repair specialist. Foundation damage can cause uneven floors and a misaligned interior wall, which in turn causes stuck doors and windows. To avoid future costly and risky repairs, it's important to deal with these issues as soon as you can. These issues can get worse until your home is unstable and structurally unsound if not addressed. Call the Southeast's top foundation repair specialists to set up an inspection today!
Cracking/Blowing Issues
When double glazing starts to deteriorate, it may cause cracks to form. This can be an unsightly sight and also let all the heat from your home to escape. This can also pose an injury risk for your family members as the glass pieces can cause injuries in the event of a break. It is recommended to repair any double glazing windows that have cracks prior to it getting worse, as this may increase the cost of replacing the windows.
Window seals are crucial to prevent drafts from entering your home and keep air between your window panes. However, as time passes, these can become perished or shrink due to weather changes. Unchecked, it can cause condensation, moisture and draughts inside your home.
This issue can usually be solved by an expert. They will be able to replace the window seal and get your windows back to their original condition. They can also recommend additional features that will decrease the possibility of a stress crack forming in the future, like trickle vents to improve ventilation.
It is also possible to lubricate the hinges and handles of your windows and door. This will help them to move more smoothly and will allow the lock to function as it should. Put some lubricating oils on a lint-free cloth and rub it into the handles and hinges, and also in the places where they pass through the frame (for instance, windows with sash). It can also be helpful to remove handles from the frames and wash them by using warm water to get rid of any dirt or grit which has been stuck to them.
If your uPVC windows and doors aren't functioning as they should, it is crucial to contact a professional to repair them. They can identify the problem quickly and fix it in a short space of time. It is a lot cheaper and safer than trying to fix it yourself and risk damaging the mechanisms. You'll also have peace of mind knowing your home is secure and secure.